Crystal clear and fast two component epoxy resin adhesive
Ideal for fast, strong and invisible repair of many different materials such as ceramics, porcelain, glass, leather, wood, stone and metal. Bonds the different materials to each other and to each other.
Universally applicable with many materials
Temperature resistant between -20°C and +70°C
Resistant to chemicals
Press the desired quantity of the two components through the static mixer onto one of the objects to be glued. Spread the mixture, which can be worked at room temperature (+20°C) for the next 1.5 hours, in a thin layer on one of the two materials. Connect the two materials and keep the joint in the same position for 7 hours. Be careful not to move the parts until the adhesive is completely cured. After use: Clean the syringe with a cloth and place the special cap on the double syringe holder. Hardener and binder must only come into contact during use.
Some plastics, such as polyethylene and polypropylene, cannot be bonded. You can test this with a glowing copper wire held to the plastic. Does it smell like wax? Then you can't glue it.
Use adhesive tape to keep the parts to be bonded in place during the curing time.
Innovative adhesive technology Made in Germany.