Universal, strong two-component epoxy resin adhesive
Ideal for repairing metal, ceramics, porcelain, glass, crystal glass, ivory, pearls, gemstones and various plastics (polyester, bakelite, formica, solid polystyrene and acrylic (Perspex®)).
Very strong (up to 170 kg/cm²)
Temperature resistant between -30°C and +80°C
Resistant to chemicals
Press the desired quantity of the two components through the static mixer onto one of the objects to be glued. Spread the mixture, which can be worked at room temperature (+20°C) for the next 1.5 hours, in a thin layer on one of the two materials. Connect the two materials and keep the joint in the same position for 7 hours. Be careful not to move the parts until the adhesive is completely cured. After use: Clean the syringe with a cloth and place the special cap on the double syringe holder. Hardener and binder must only come into contact during use.
Some plastics, such as polyethylene and polypropylene, cannot be bonded. You can test which type of plastic it is by using a glowing copper wire held to the plastic. If a typical wax smell develops, the plastics are not adhesive.
Use adhesive tape to hold the parts to be bonded in position during the curing time.
Innovative adhesive technology Made in Germany.